Measurement of oocyte temporal maturation process by means of a simple optical micro-system

We present a simple optical micro-system used to measure the transmission spectra of oocytes in order to qualify their maturation stage. Two applications of the device are possible: (i) the evaluation of the maturation stages of oocytes, and (ii) the development of a fertilization indicator. For the first application, GV, MI and MII oocytes were also analysed. Transmission spectra allow the 3 maturation stages to be identified but cannot be used to estimate the maturity of an unknown oocyte. Oocytes are subject to continuous development. This is why spectral separation of the 3 maturation stages cannot be made although they can be visually identified. However, the visual observation remains biologist-dependent. We therefore investigated the temporal maturation evolution of the oocytes in terms of transmission spectra and probability analysis. Results show that oocytes to be fertilized should not only be chosen in the MII stage, but also at the right time during the MII stage. This particular aspect requires further investigation. However, spectral measurements could be used as a technique for monitoring the maturation evolution of the oocytes. Fertilized oocytes exhibiting fertilization abnormalities were also tested. The device proved to be an efficient fertilization indicator.     

Path dependent stochastic models to detect planned and actual technology use: A case study of OpenOffice

Context

Adopting IT innovation in organizations is a complex decision process driven by technical, social and economic issues. Thus, those organizations that decide to adopt innovation take a decision of uncertain success of implementation, as the actual use of a new technology might not be the one expected. The misalignment between planned and effective use of innovation is called assimilation gap.

Objective

This research aims at defining a quantitative instrument for measuring the assimilation gap and applying it to the case of the adoption of OSS.

Method

In this paper, we use the theory of path dependence and increasing returns of Arthur. In particular, we model the use of software applications (planned or actual) by stochastic processes defined by the daily amounts of files created with the applications. We quantify the assimilation gap by comparing the resulting models by measures of proximity.

Results

We apply and validate our method to a real case study of introduction of OpenOffice. We have found a gap between the planned and the effective use despite well-defined directives to use the new OS technology. These findings suggest a need of strategy re-calibration that takes into account environmental factors and individual attitudes.

Conclusions

The theory of path dependence is a valid instrument to model the assimilation gap provided information on strategy toward innovation and quantitative data on actual use are available.     

An haptic-based immersive environment for shape analysis and modelling

Currently, the design of aesthetic products is a process that requires a set of activities where digital models and physical mockups play a key role. Typically, these are modified (and built) several times before reaching the desired design, increasing the development time and, consequently, the final product cost. In this paper, we present an innovative design environment for computer-aided design (CAD) surface analysis. Our system relies on a direct visuo-haptic display system, which enables users to visualize models using a stereoscopic view, and allows the evaluation of sectional curves using touch. Profile curves are rendered using an haptic device that deforms a plastic strip, thanks to a set of actuators, to reproduce the curvature of the shape co-located with the virtual model. By touching the strip, users are able to evaluate shape characteristics, such as curvature or discontinuities (rendered using sound), and to assess the surface quality. We believe that future computer-aided systems (CAS)/CAD systems based on our approach will contribute in improving the design process at industrial level. Moreover, these will allow companies to reduce the product development time by reducing the number of physical mockups necessary for the product design evaluation and by increasing the quality of the final product, allowing a wider exploration and comparative evaluation of alternatives in the given time.     

Anodic stripping voltammetric determination of copper(II) using a functionalized carbon nanotubes paste electrode modified with crosslinked chitosan

The development and application of a functionalized carbon nanotubes paste electrode (CNPE) modified with crosslinked chitosan for determination of Cu(II) in industrial wastewater, natural water and human urine samples by linear scan anodic stripping voltammetry (LSASV) are described. Different electrodes were constructed using chitosan and chitosan crosslinked with glutaraldehyde (CTS-GA) and epichlorohydrin (CTS-ECH). The best voltammetric response for Cu(II) was obtained with a paste composition of 65% (m/m) of functionalized carbon nanotubes, 15% (m/m) of CTS-ECH, and 20% (m/m) of mineral oil using a solution of 0.05 mol L⁻¹ KNO₃ with pH adjusted to 2.25 with HNO₃, an accumulation potential of −0.3 V vs. Ag/AgCl (3.0 mol L⁻¹ KCl) for 300 s and a scan rate of 100 mV s⁻¹. Under these optimal experimental conditions, the voltammetric response was linearly dependent on the Cu(II) concentration in the range from 7.90 × 10⁻⁸ to 1.60 × 10⁻⁵ mol L⁻¹ with a detection limit of 1.00 × 10⁻⁸ mol L⁻¹. The samples analyses were evaluated using the proposed sensor and a good recovery of Cu(II) was obtained with results in the range from 98.0% to 104%. The analysis of industrial wastewater, natural water and human urine samples obtained using the proposed CNPE modified with CTS-ECH electrode and those obtained using a comparative method are in agreement at the 95% confidence level.     

A method for a robust optimization of joint product and supply chain design

This paper proposes a method for finding a robust solution to the problem of joint product family and supply chain design. Optimizing product design and the supply chain network at the same time brings substantial benefits. However, this approach involves decisions that can generate uncertainties in the long term. The challenge is to come up with a method that can adapt to most possible environments without straying too far from the optimal solution. Our approach is based on the generation of scenarios that correspond to combinations of uncertain parameters within the model. The performance of designs resulting from these scenario optimizations are compared to the performance of each of the other design scenarios, based on their probability of occurrence. The proposed methodology will allow practitioners to choose a suitable design, from the most profitable to the most reliable.     

Elastic Resource Allocation Algorithms for Collaboration Applications

Cloud technologies can provide elasticity to real-time audio and video (A/V) collaboration applications. However, cloud-based collaboration solutions generally operate on a best-effort basis, with neither delivery nor quality guarantees, and high-quality business focused solutions rely on dedicated infrastructure and hardware-based components. This article describes our 2-year of research in the EMD project, which targets to migrate a hardware-based and business focused A/V collaboration solution to a software-based platform hosted in the cloud, providing higher levels of elasticity and reliability. Our focus during this period was an educational collaboration scenario with teachers and students (locally present in the classroom or remotely following the classes). A model of collaboration streaming (e.g. network topology, codecs, stream, streaming workflow, software components) is defined as base for software deployment and preemptive VM allocation techniques. These heuristics are evaluated using a version of the CloudSim simulator extended to generate and simulate realistic collaboration scenarios, to manage network congestion and to monitor a.o. cost and session delay metrics. Our results show that the algorithms reduce costs when compared to previously designed approaches, having an effectiveness of 99% in meeting A/V collaboration setup deadlines, which is a stringent requirement for this collaboration application.     

Authorship verification applied to detection of compromised accounts on online social networks

Compromising legitimate accounts has been the most used strategy to spread malicious content on OSN (Online Social Network). To address this problem, we propose a pure text mining approach to check if an account has been compromised based on its posts content. In the first step, the proposed approach extracts the writing style from the user account. The second step comprehends the k-Nearest Neighbors algorithm (k-NN) to evaluate the post content and identify the user. Finally, Baseline Updating (third step) consists of a continuous updating of the user baseline to support the current trends and seasonality issues of user’s posts. Experiments were carried out using a dataset from Twitter composed by tweets of 1000 users. All the three steps were individually evaluated, and the results show that the developed method is stable and can detect the compromised accounts. An important observation is the Baseline Updating contribution, which leads to an enhancement of accuracy superior of 60 %. Regarding average accuracy, the developed method achieved results over 93 %.     

Variational multiscale large-eddy simulations of the flow past a circular cylinder: Reynolds number effects

Variational multiscale large-eddy simulations (VMS–LES) of the flow around a circular cylinder are carried out at different Reynolds numbers in the subcritical regime, viz. Re = 3900, 10,000 and 20,000, based on the cylinder diameter. A mixed finite-element/finite-volume discretization on unstructured grids is used. The separation between the largest and the smallest resolved scales is obtained through a variational projection operator and finite-volume cell agglomeration. The WALE subgrid scale model is used to account for the effects of the unresolved scales; in the VMS approach, it is only added to the smallest resolved ones. The capability of this methodology to accurately predict the aerodynamic forces acting on the cylinder and in capturing the flow features are evaluated for the different Reynolds numbers considered. The sensitivity of the results to different simulation parameters, viz. agglomeration level and numerical viscosity, is also investigated at Re = 20,000.